1010 The remote computer has ended the connection.
1011 The local computer is low on memory. Close some programs, and then connect to the remote computer again.
1012 Because of a security error, the client could not connect to the remote computer. Verify that you are logged on to the network, and then try connecting again.
1013 The specified remote computer could not be found. Verify that you have typed\nthe correct computer name or IP address, and then try connecting again.
1014 Because of a protocol error, the client could not connect to the remote computer. \nPlease try connecting to the remote computer again. If the client still fails to connect, contact your network administrator.
1015 The connection was ended because of a network error. Please try connecting to the remote computer again.
1016 An internal error has occurred.
1017 The client could not connect to the remote computer.\n\nRemote connections might not be enabled or the computer might be too busy to accept new connections. \nIt is also possible that network problems are preventing your connection.\n\nPlease try connecting again later. If the problem continues to occur, contact your administrator.
1018 Client and server versions do not match. Please upgrade your client software and then try connecting again.
1019 Because of an error in data encryption, this session will end. Please try connecting to the remote computer again.
1020 Because of a protocol error, this session will be disconnected. Please try connecting to the remote computer again.
1021 The specified computer name contains invalid characters. Please verify the name and try again.
1023 Maximum encryption strength: %d bits
1024 An error occured while loading the Terminal Services ActiveX control.\nPlease make sure the correct version of mstscax.dll is in the path
1025 Could not load the Terminal Services ActiveX control.\nMake sure mstscax.dll is in the path.
1026 The Terminal Services ActiveX control (mstscax.dll)\ndoes not match the version of the client shell.
1027 Remote Desktop Connection\n\nMSTSC [<Connection File>] [/v:<server[:port]>] [/console] [/f[ullscreen]] \n[/w:<width> /h:<height>] | /Edit"ConnectionFile" | /Migrate | /?\n\n<Connection File> -- specifies the name of an .rdp file for the \nconnection.\n\n/v:<server[:port]> -- specifies the terminal server to which you want \n to connect.\n\n/console -- connects to the console session of a server.\n\n/f -- Starts the client in full-screen mode.\n \n/w:<width> -- specifies the width of the Remote Desktop screen.\n\n/h:<height> -- Specifies the height of the Remote Desktop screen.\n\n/edit -- Opens the specified .rdp file for editing.\n\n/migrate -- migrates legacy connection files that were created with \nClient Connection Manager to new .rdp connection files.\n\n/? -- generates this Usage message.
1028 The file (%s) could not be found.
1029 Unable to create or access your %s folder (%s).\nYour connection settings will not be automatically saved on exit.
1030 Unable to open connection file - %s
1031 An error occurred while saving to file %s
1032 An error occurred while loading from file %s
1033 An error occurred when the client attempted to connect to the remote computer. \nCheck your system memory and then try the connection again.
1034 Unable to get the path to your `My Documents' folder
1035 An error occured while initializing your default connection settings
1036 My Documents
1037 Usage
1038 The client could not connect. You are already connected to the console of this computer. A new console session cannot be established.
1039 The path you entered, '%s', is too long so your connection could not be saved.\nPlease try to save the file again with a shorter path.
1040 Remote Desktop Redirected Printer Doc
1041 Help cannot be displayed because your system does not have HTML Help installed.\nPlease install HTML Help and try again.
1042 Your password was not saved because your operating system does not support this security feature. You must type your password each time you want to connect to a remote computer.
1043 Invalid connection file (%s) specified
1044 The client can't connect becuase it doesn't support FIPS encryption level. \nPlease lower the server side required security level Policy, or contact your network administrator for assistance
1051 The remote connection has timed out. Please try connecting to the remote computer again.
1054 Connecting to %s...
1055 The %s domain/workgroup does not contain any Terminal servers.
1057 The connection to the remote computer was broken. This may have been caused by a network error.\nPlease try connecting to the remote computer again.
1058 The remote session to the remote computer was ended by means of an administration tool.\nYour administrator might have ended your connection.
1059 The remote session was disconnected because another user has connected to the session.
1060 The remote session was disconnected because your session was logged off at the remote computer.\nYour administrator or another user might have ended your connection.
1065 imejp.ime
1066 imekr98u.ime
1067 cintlgnt.ime
1068 pintlgnt.ime
1070 &Options >>
1071 &Options <<
1073 16 Colors
1074 256 Colors
1075 High Color (15 bit)
1076 High Color (16 bit)
1077 True Color (24 bit)
1078 %1!d! by %2!d! pixels
1079 Full Screen
1080 In full screen mode only
1081 On the remote computer
1082 On the local computer
1083 Bring to this computer
1084 Leave at remote computer
1085 Do not play
1086 <Browse for more...>
1087 General
1088 Display
1089 Local Resources
1090 Programs
1091 Experience
1092 Remote Desktop Files (*.RDP)*.RDP
1094 Close
1095 The remote session was ended because the idle timeout limit was reached. This limit is set by the server administrator or by network policies.
1096 The remote session ended because the total logon time limit was reached. This limit is set by the server administrator or by network policies.
1097 Remote Desktop Disconnected
1098 Because of a protocol error (code: 0x%x), the remote session will be disconnected.\nPlease try connecting to the remote computer again.
1099 A licensing error occurred while the client was attempting to connect (Licensing timed out).\nPlease try connecting to the remote computer again.
1100 The remote computer disconnected the session because of an error in the licensing protocol.\nPlease try connecting to the remote computer again or contact your server administrator.
1101 The connection was disconnected because the remote computer is low on memory.
1102 The remote session was disconnected because there was an internal error in the remote computer's licensing protocol.
1103 The remote session was disconnected because there are no Terminal Server License Servers available to provide a license.\nPlease contact the server administrator.
1104 The remote session was disconnected because there are no Terminal Server client access licenses available for this computer.\nPlease contact the server administrator.
1105 The remote session was disconnected because the remote computer received an invalid licensing message from this computer.
1106 The remote session was disconnected because the Terminal Server client access license stored on this computer has been modified.
1107 The remote session was disconnected because the Terminal Server client access license stored on this computer is in an invalid format.
1108 The remote session was disconnected because there were network problems during the licensing protocol.\nPlease try connecting to the remote computer again.
1109 The remote session was disconnected because the client prematurely ended the licensing protocol.
1110 The remote session was disconnected because a licensing message was incorrectly encrypted.
1111 The remote session was disconnected because the local computer's client access license could not be upgraded or renewed.\nPlease contact the server administrator.
1112 The remote session was disconnected because the remote computer is not licensed to accept remote connections.\nPlease contact the server administrator.
1113 The client could not establish a connection to the remote computer.\n\nThe most likely causes for this error are:\n1) Remote connections might not be enabled at the remote computer. \n2) The maximum number of connections was exceeded at the remote computer.\n3) A network error occurred while establishing the connection.
1114 Because of a protocol error detected at the client (code 0x%x), this session will be disconnected.\nPlease try connecting to the remote computer again.
1115 The remote session was disconnected because of a decompression failure at the client side.\nPlease try connecting to the remote computer again.
1116 The remote session was disconnected because of a decryption error at the server.\nPlease try connecting to the remote computer again.
1117 The client could not establish a connection to the remote computer.\n\nThe most likely causes for this error are:\n1) Remote connections might not be enabled at the remote computer. \n2) The maximum number of connections was exceeded at the remote computer.\n3) A network error occurred while establishing the connection.\n4) The remote computer might not support the required FIPS security level. Please lower the client \nside required security level Policy, or contact your network administrator for assistance
1200 Cancel
1201 Remote Desktop
1202 Connection
1203 Tahoma
1204 20
1205 Tahoma
1206 24
1207 5
1220 Modem (28.8 Kbps)
1221 Modem (56 Kbps)
1222 Broadband (128 Kbps - 1.5 Mbps)
1223 LAN (10 Mbps or higher)
1224 Custom (Defined in Options / Experience)
1225 Custom
1300 Cleaning temp directory
1301 Preparing paste information...
1302 - Disk drives
1303 - Serial ports
1304 Connection attempt: %1!d! of %2!d!
2000 Because of an unknown error, the remote session will be disconnected. The local computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2001 The remote session will be disconnected. Your computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2002 Error: Out of memory. The remote session will be disconnected.\nClose some programs on the local computer, and then try connecting to the remote computer again.
2003 Error: Unable to allocate window resources. The remote session will be disconnected.\nClose some programs on the local computer, and then try connecting to the remote computer again.
2004 Error: Unable to allocate window resources. The session will be disconnected.\nAfter closing some applications, try to reconnect the session.
2005 An internal state error has occurred. The remote session will be disconnected. Your local computer might be low on memory.\nClose some programs, and then try connecting to the remote computer again.
2006 The session will be disconnected. Your computer may be low on memory.\nAfter closing some applications, try to reconnect the session.
2007 Error: An unrecoverable error occurred while the client was attempting to connect.\nClose some programs, and then try connecting to the remote computer again.
2998 The session will be disconnected. Your computer may be low on memory.\nAfter closing some applications, try to reconnect the session.
2999 Fatal Error (Error Code: %d)
3000 &Help
3001 Remote Desktop Connection &Help
3002 &About
3013 &Close
4000 Remote Desktop Connection
4001 Connect to a computer's desktop from a remote location, and run applications as if you were sitting at its console.
